Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Chris Bertrand
02/26/09 07:48
Read: 651 times
Rhode Island

#162892 - I figured as such
Responding to: Joseph Hebert's previous message
That is the method I use for my T-Tech routers, soldering the wires, but when you star approaching 500 vias, that 1000 connections to solder without a single part in the board. Then you have to deal with top and bottom soldering of the IC itself. I always set my through hole parts to route on the bottom side of the board........thus increasing vias.......its a real PITA for large designs, but hey the routers are paid for I guess.

For the hot and heavy stuff, $100 for a prototype from advanced circuits is the way to go.

thanks for the feedback

List of 25 messages in thread
PCB prototype        Joseph Hebert      02/25/09 11:23      
   How does the LPKF machine do as a drill?      Richard Erlacher      02/25/09 16:09      
      tool life      Joseph Hebert      02/25/09 20:33      
         Well, I just guessed ...      Richard Erlacher      02/26/09 10:15      
            Expensive Drill      Joseph Hebert      02/26/09 10:30      
               Indeed! But useless for anything else.      Richard Erlacher      02/26/09 16:10      
                  Expensive? Yes. Useless? ...      Joseph Hebert      02/27/09 09:49      
                     True enough!      Richard Erlacher      02/27/09 10:00      
                        Dull Tools      Joseph Hebert      02/27/09 14:07      
                           dull tools      Richard Erlacher      02/27/09 14:29      
                              10 mil end mills      Joseph Hebert      02/27/09 14:53      
                                 Wet ?      Steve M. Taylor      03/01/09 15:34      
                                    Air cooled only      Joseph Hebert      03/01/09 15:57      
   Plating??      Chris Bertrand      02/25/09 20:54      
      plating      Joseph Hebert      02/26/09 07:42      
         I figured as such      Chris Bertrand      02/26/09 07:48      
   very good quality      JecksonS Ben      02/26/09 00:19      
   Impressive but..      Oliver Sedlacek      02/26/09 01:32      
      Prototyping prices      Joseph Hebert      02/26/09 08:07      
         Very interesting approach      Dave Brooks      02/28/09 13:43      
            PCBExpress      Joseph Hebert      02/28/09 21:41      
               Sunstone Circuits      Michael Karas      02/28/09 23:56      
                  Sunstone      Joseph Hebert      03/01/09 16:16      
                  P.S. Welcome back      Joseph Hebert      03/02/09 09:39      
               Now-a-days...      Dave Brooks      03/02/09 13:41      

Back to Subject List