| Valentin Angelovski 06/13/09 11:11 Modified: 06/13/09 11:14 Read: 318 times Melbourne Australia |
#166055 - Some hints/advice.. Responding to: Giang Ho's previous message |
Hi Giang,
Ok Here's a few questions off the top: 1.)Are you setting XON/XOFF handshaking in hyperterminal? 2.)Doesn't the RTS line need to be held active in order to power-on the printer? Does hyperterminal provide you with this ability? 3.)Have you tried using the sample programs outlined in the Command reference? These appear to be Microsoft QUICKBASIC programs (Do a search on this) - I'd try this before going back to hyperterminal! Giang Ho said:
With the little time left for the project, any advice from you guys will be very much appreciated. With all due respect, time should be set aside for final year projects. After all, this is when one gets to connect the dots in my humble opinion. Regards, Valentin Angelovski |
| Topic | Author | Date |
| CMP-10 thermal printer & 8051 | Giang Ho | 06/13/09 08:47 |
| Printer settings | Hal Albach | 06/13/09 10:27 |
| Some hints/advice.. | Valentin Angelovski | 06/13/09 11:11 |
| I sent commands like "BEL", or "ESC RS" | Andy Neil | 06/13/09 11:14 |
| ASCII table | Per Westermark | 06/13/09 13:58 |
| HyperTerminal & ASCII code | Giang Ho | 06/13/09 18:56 |
| Would it be realistic.... | Michael Karas | 06/13/09 21:45 |
| Not text, | Per Westermark | 06/14/09 01:54 |
| Not text, | Giang Ho | 06/14/09 03:08 |
| Spend more time with the ASCII table. | Per Westermark | 06/14/09 03:35 |
| Still fail to test the printer | Giang Ho | 06/18/09 07:37 |
| The printer is working | Giang Ho | 06/18/09 09:04 |
| ASCII char on HyperTerminal | Mahesh Joshi | 06/20/09 07:11 |
| Re: ASCII char on HyperTerminal | Giang Ho | 06/21/09 09:16 |
| ASCII char on HyperTerminal | Mahesh Joshi | 06/20/09 07:11 |
| Is that guaranteed? | Andy Neil | 06/20/09 13:15 |
| I use it that way | Mahesh Joshi | 06/22/09 01:28 |
| XOn/XOff set on MCU side | Giang Ho | 06/18/09 22:08 |
| You have to do it yourself | Andy Neil | 06/19/09 01:36 |
| Re:You have to do it yourself | Giang Ho | 06/21/09 08:57 |
| Intern? [edited] | Andy Neil | 06/24/09 03:00 |
| HyperTerminal and microcontroller - please help! | Giang Ho | 06/23/09 10:36 |
| HyperTerminal and microcontroller - please help! | Giang Ho | 06/23/09 19:07 |
| May be I need to use cross over serial cable | Andy Neil | 06/24/09 03:03 |
| Use printf to output to UART, but receive incorrect data | Giang Ho | 06/24/09 10:09 |
| Re: Use printf to output to UART, but receive incorrect dat | Giang Ho | 06/24/09 10:13 |
| printf only can output value from 256 to 32767 correctly | Giang Ho | 06/25/09 07:42 |
| Hasn't Maarten already explained this? | Andy Neil | 06/25/09 07:54 |
| Re: Hasn't Maarten already explained this? | Giang Ho | 06/25/09 08:31 |
| Show it! | Andy Neil | 06/25/09 09:08 |
| Re: Show it | Giang Ho | 06/25/09 19:48 |
| use a cast | Maarten Brock | 06/24/09 16:11 |
| or RTFM | Andy Neil | 06/24/09 17:06 |
| Re: RTFM | Giang Ho | 06/25/09 19:55 |
| I found the solution. Thanks | Giang Ho | 06/26/09 08:46 |
Direct Memory?  | Andy Neil | 06/26/09 09:03 |
| Re: Direct memory | Giang Ho | 06/26/09 09:21 |
| Definitely a BAD Idea! | Andy Neil | 06/26/09 09:43 |
| Re:Definitely a BAD Idea! | Giang Ho | 06/26/09 10:01 |
| Could you please suggest? | Andy Neil | 06/26/09 10:25 |
| Re: Do not call from ISR | Giang Ho | 06/26/09 18:19 |
| I didn't say that | Andy Neil | 06/27/09 03:02 |
Thanks! | Giang Ho | 06/27/09 09:10 |
| Re: use a cast | Giang Ho | 06/24/09 19:47 |