| Michael Karas 06/13/09 21:45 Read: 353 times Beaverton Or USA |
#166068 - Would it be realistic.... Responding to: Giang Ho's previous message |
If you have a functional printer...
If you can see the printer work when controlled from PC... If you have a working UART interface from your MCU to RS232 signaling... Then it is completely realistic to expect that, with the proper cable hookup and good signal integrity, you can get the MCU to operate the printer!! Michael Karas |
| Topic | Author | Date |
| CMP-10 thermal printer & 8051 | Giang Ho | 06/13/09 08:47 |
| Printer settings | Hal Albach | 06/13/09 10:27 |
| Some hints/advice.. | Valentin Angelovski | 06/13/09 11:11 |
| I sent commands like "BEL", or "ESC RS" | Andy Neil | 06/13/09 11:14 |
| ASCII table | Per Westermark | 06/13/09 13:58 |
| HyperTerminal & ASCII code | Giang Ho | 06/13/09 18:56 |
| Would it be realistic.... | Michael Karas | 06/13/09 21:45 |
| Not text, | Per Westermark | 06/14/09 01:54 |
| Not text, | Giang Ho | 06/14/09 03:08 |
| Spend more time with the ASCII table. | Per Westermark | 06/14/09 03:35 |
| Still fail to test the printer | Giang Ho | 06/18/09 07:37 |
| The printer is working | Giang Ho | 06/18/09 09:04 |
| ASCII char on HyperTerminal | Mahesh Joshi | 06/20/09 07:11 |
| Re: ASCII char on HyperTerminal | Giang Ho | 06/21/09 09:16 |
| ASCII char on HyperTerminal | Mahesh Joshi | 06/20/09 07:11 |
| Is that guaranteed? | Andy Neil | 06/20/09 13:15 |
| I use it that way | Mahesh Joshi | 06/22/09 01:28 |
| XOn/XOff set on MCU side | Giang Ho | 06/18/09 22:08 |
| You have to do it yourself | Andy Neil | 06/19/09 01:36 |
| Re:You have to do it yourself | Giang Ho | 06/21/09 08:57 |
| Intern? [edited] | Andy Neil | 06/24/09 03:00 |
| HyperTerminal and microcontroller - please help! | Giang Ho | 06/23/09 10:36 |
| HyperTerminal and microcontroller - please help! | Giang Ho | 06/23/09 19:07 |
| May be I need to use cross over serial cable | Andy Neil | 06/24/09 03:03 |
| Use printf to output to UART, but receive incorrect data | Giang Ho | 06/24/09 10:09 |
| Re: Use printf to output to UART, but receive incorrect dat | Giang Ho | 06/24/09 10:13 |
| printf only can output value from 256 to 32767 correctly | Giang Ho | 06/25/09 07:42 |
| Hasn't Maarten already explained this? | Andy Neil | 06/25/09 07:54 |
| Re: Hasn't Maarten already explained this? | Giang Ho | 06/25/09 08:31 |
| Show it! | Andy Neil | 06/25/09 09:08 |
| Re: Show it | Giang Ho | 06/25/09 19:48 |
| use a cast | Maarten Brock | 06/24/09 16:11 |
| or RTFM | Andy Neil | 06/24/09 17:06 |
| Re: RTFM | Giang Ho | 06/25/09 19:55 |
| I found the solution. Thanks | Giang Ho | 06/26/09 08:46 |
Direct Memory?  | Andy Neil | 06/26/09 09:03 |
| Re: Direct memory | Giang Ho | 06/26/09 09:21 |
| Definitely a BAD Idea! | Andy Neil | 06/26/09 09:43 |
| Re:Definitely a BAD Idea! | Giang Ho | 06/26/09 10:01 |
| Could you please suggest? | Andy Neil | 06/26/09 10:25 |
| Re: Do not call from ISR | Giang Ho | 06/26/09 18:19 |
| I didn't say that | Andy Neil | 06/27/09 03:02 |
Thanks! | Giang Ho | 06/27/09 09:10 |
| Re: use a cast | Giang Ho | 06/24/09 19:47 |