| Gopal Amlekar 01/15/10 06:48 Read: 167 times Pune India |
#172483 - RE: That cap did help? Responding to: Kai Klaas's previous message |
Kai Klass,
There is already a capacitor on that pin. It is 10uF and I tried lower values too like 100nF. Lowering the value only changed the discharge time and on ALE rising edge, voltage on that input pin went down fast instead of slowly decreasing. Sorry for delayed reply. |
| Topic | Author | Date |
| ADC0809 problem | Gopal Amlekar | 01/10/10 09:09 |
| Is the very same ADC chip in both cases? | Daniel Contarino | 01/10/10 09:51 |
| From time to time... | Kai Klaas | 01/10/10 14:22 |
| Datasheet read, same hardware | Gopal Amlekar | 01/11/10 02:53 |
| Define 1000000000% | Per Westermark | 01/11/10 06:48 |
| Thoughts... | Kai Klaas | 01/11/10 09:04 |
| Solved partially | Gopal Amlekar | 01/13/10 04:06 |
| So the cap did help? | Kai Klaas | 01/13/10 08:56 |
| RE: That cap did help? | Gopal Amlekar | 01/15/10 06:48 |
The input multiplexer is damaged!  | Kai Klaas | 01/15/10 08:49 |
| Discharge diode | Per Westermark | 01/15/10 10:14 |
| RE: The input multiplexer is damaged | Gopal Amlekar | 01/16/10 02:01 |
| Indeed, a very poor design!!! | Kai Klaas | 01/16/10 09:38 |
RE: Indeed, a very poor design!!! | Gopal Amlekar | 01/17/10 06:27 |