Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Louis S
01/15/10 08:06
Read: 291 times


 
#172489 - SPI Phase/Polarity
Responding to: Erik Malund's previous message
Hi Erik,

Since I don't have an emulator, I've done some pretty extensive probing via scope. The SPI is configured for mode 0 (cpol = 0, cpha = 0) and the simulator and scope output agree (matches the datasheet expected waveforms).

The SPI port is responding as I would expect except for the actual data value coming out of it.

I'm seeing instances where address instead of value passing might explain some other glitches, but I've been focusing on the SPI currently since it's the simplest.

Louis

List of 30 messages in thread
TopicAuthorDate
Simulation vs. Embedded Discrepancy      Louis S      01/15/10 07:14      
   Hardware fault?      Andy Neil      01/15/10 07:39      
      Responding to: Andy Neil's previous message      Louis S      01/15/10 07:51      
   illustration of edge difference?      Erik Malund      01/15/10 08:00      
      SPI Phase/Polarity      Louis S      01/15/10 08:06      
         address instead of value      Andy Neil      01/15/10 08:17      
            Doesn't seem coincidental      Louis S      01/20/10 13:19      
               MOVX command fails      Louis S      01/21/10 09:28      
                  Definitely sounds like a hardware fault!      Andy Neil      01/21/10 12:01      
                  Have you tried doing this in ASM?      Richard Erlacher      01/21/10 12:32      
                     The loop in ASM      Louis S      01/21/10 14:27      
                        I think...      Jez Smith      01/21/10 15:11      
                        Sounds like hardware again      Andy Neil      01/21/10 17:34      
                           If this were reduced to the essentials ...      Richard Erlacher      01/21/10 18:36      
                              Oh Richard      Jez Smith      01/22/10 01:32      
                        What I was after ...      Richard Erlacher      01/21/10 18:30      
                           Reducing to Essentials      Louis S      01/22/10 10:56      
                              RE: Magic Switch On The Compiler      Andy Neil      01/22/10 12:21      
                                 Emulator trace      Louis S      01/22/10 12:59      
                                    Yes      Neil Kurzman      01/23/10 02:39      
                                       SOLVED      Louis S      01/25/10 11:10      
                                          A bit ocnfused      Andy Neil      01/25/10 11:24      
                                             Emulator and AUXR      Louis S      01/25/10 14:15      
                                                Things do tend to work best...      Andy Neil      01/25/10 14:54      
   one guess with a question      Erik Malund      01/21/10 13:46      
      Memory has plenty of gaps      Louis S      01/21/10 14:29      
         That doesn't make sense!      Andy Neil      01/23/10 03:25      
            Sloppy language on my part      Louis S      01/23/10 23:00      
      Am I missing something      Neil Kurzman      01/21/10 19:06      
      questions/request      Erik Malund      01/22/10 06:52      

Back to Subject List