| Yash Chitalia 01/18/10 11:47 Read: 246 times Mumbai India |
#172550 - The chip sounds perfect... Responding to: Michael Karas's previous message |
Michael,
The C8051F344 sounds perfect for all my applications. I'm certainly ready to convert! Just had a few queries about this chip. 1) Having programmed only the philips 8051 chips before, I am used to burning the program on the chip using Flash Magic ( which has been designed only for NXP chips). In the case of the C8051F344 which software can be used for this purpose? 2) I'm planning to build my own development board for this chip. Any suggestions? Will the datasheet be enough for this purpose? (I haven't really worked with different 8051 chips before , so I hope my doubts aren't too trivial ) Thanks, Yash |
| Topic | Author | Date |
| Controlling multiple servo motors | Yash Chitalia | 01/17/10 14:47 |
| executing code takes time | Erik Malund | 01/17/10 15:27 |
| PWM code | Steve M. Taylor | 01/17/10 15:35 |
| Thanks...now, about the PCA timer.. | Yash Chitalia | 01/17/10 16:06 |
| If SDCC Then Keil | Michael Karas | 01/17/10 16:15 |
| PWM IRQ code in C, bitops, 45 byte | Frieder Ferlemann | 01/18/10 05:19 |
| Optimization having no effect. | Yash Chitalia | 01/18/10 11:36 |
| PWM IRQ code in C, lookup table, 32 byte | Frieder Ferlemann | 01/18/10 05:29 |
| I haven't understood the table lookup concept very well... | Yash Chitalia | 01/19/10 00:55 |
| table lookup | Frieder Ferlemann | 01/19/10 02:39 |
| PWM IRQ code in C, lookup table, 30 byte | Frieder Ferlemann | 01/19/10 03:07 |
| Compiler specifics | Andy Neil | 01/19/10 04:35 |
| absolutely-locating xdata at 256 byte boundary | Frieder Ferlemann | 01/19/10 05:00 |
| I see. | Andy Neil | 01/19/10 06:34 |
| An example code.. | Yash Chitalia | 01/20/10 02:20 |
| Keil: Specifics and non-specifics | Andy Neil | 01/20/10 02:50 |
| Not really working... | Yash Chitalia | 01/20/10 03:55 |
| Enough power? | Per Westermark | 01/20/10 09:45 |
| RE: running 32 servo motors | Andy Neil | 01/20/10 10:34 |
| The chip sounds perfect... | Yash Chitalia | 01/18/10 11:47 |
| not worth it | Erik Malund | 01/18/10 12:10 |
| Servo control will become difficult then... | Yash Chitalia | 01/18/10 12:42 |
| output | Andy Peters | 01/18/10 12:52 |
| HCT chips have ... | Erik Malund | 01/18/10 14:12 |
| Eval a concept with a single PCA and 3:8 HCT multiplexer? | Frieder Ferlemann | 01/18/10 14:36 |
| Check their website | Andy Neil | 01/18/10 14:44 |
| Here is the code... | Yash Chitalia | 01/18/10 15:28 |
| "sbit MTRS=P2^0;" is not OK here | Frieder Ferlemann | 01/18/10 16:11 |
| Keil syntax? | Andy Neil | 01/18/10 17:36 |
| "#define" not working.."sbit" works | Yash Chitalia | 01/18/10 23:32 |
| Yes, you were correct originally! | Andy Neil | 01/19/10 01:22 |
| Seconded | Andy Neil | 01/18/10 12:45 |
| Servo_0.1.zip | Murray R. Van Luyn | 01/18/10 15:02 |
links | James Hinnant | 02/18/10 21:10 |
| Eventually feed the guys at http://servomaster.sf.net ? | Frieder Ferlemann | 01/18/10 15:12 |
| servomaster.sf.net FLOSS | James Hinnant | 02/04/10 11:48 |
| Maybe of some use... | James Bowmaster | 02/10/10 14:40 |
| Whoops... found a bug | James Bowmaster | 02/10/10 16:35 |
| What bug? | Andy Neil | 02/10/10 16:41 |
| Bug | James Bowmaster | 02/10/10 18:47 |
| Improved version uploaded | James Bowmaster | 02/12/10 21:26 |