| Yash Chitalia 01/18/10 12:42 Read: 242 times Mumbai India |
#172553 - Servo control will become difficult then... Responding to: Erik Malund's previous message |
Yes, I did notice that the chip runs on 3.3V. And the output at the pins will therefore be around 2.5 volts. Servo control will become quite a difficulty in that case. |
| Topic | Author | Date |
| Controlling multiple servo motors | Yash Chitalia | 01/17/10 14:47 |
| executing code takes time | Erik Malund | 01/17/10 15:27 |
| PWM code | Steve M. Taylor | 01/17/10 15:35 |
| Thanks...now, about the PCA timer.. | Yash Chitalia | 01/17/10 16:06 |
| If SDCC Then Keil | Michael Karas | 01/17/10 16:15 |
| PWM IRQ code in C, bitops, 45 byte | Frieder Ferlemann | 01/18/10 05:19 |
| Optimization having no effect. | Yash Chitalia | 01/18/10 11:36 |
| PWM IRQ code in C, lookup table, 32 byte | Frieder Ferlemann | 01/18/10 05:29 |
| I haven't understood the table lookup concept very well... | Yash Chitalia | 01/19/10 00:55 |
| table lookup | Frieder Ferlemann | 01/19/10 02:39 |
| PWM IRQ code in C, lookup table, 30 byte | Frieder Ferlemann | 01/19/10 03:07 |
| Compiler specifics | Andy Neil | 01/19/10 04:35 |
| absolutely-locating xdata at 256 byte boundary | Frieder Ferlemann | 01/19/10 05:00 |
| I see. | Andy Neil | 01/19/10 06:34 |
| An example code.. | Yash Chitalia | 01/20/10 02:20 |
| Keil: Specifics and non-specifics | Andy Neil | 01/20/10 02:50 |
| Not really working... | Yash Chitalia | 01/20/10 03:55 |
| Enough power? | Per Westermark | 01/20/10 09:45 |
| RE: running 32 servo motors | Andy Neil | 01/20/10 10:34 |
| The chip sounds perfect... | Yash Chitalia | 01/18/10 11:47 |
| not worth it | Erik Malund | 01/18/10 12:10 |
| Servo control will become difficult then... | Yash Chitalia | 01/18/10 12:42 |
| output | Andy Peters | 01/18/10 12:52 |
| HCT chips have ... | Erik Malund | 01/18/10 14:12 |
| Eval a concept with a single PCA and 3:8 HCT multiplexer? | Frieder Ferlemann | 01/18/10 14:36 |
| Check their website | Andy Neil | 01/18/10 14:44 |
| Here is the code... | Yash Chitalia | 01/18/10 15:28 |
| "sbit MTRS=P2^0;" is not OK here | Frieder Ferlemann | 01/18/10 16:11 |
| Keil syntax? | Andy Neil | 01/18/10 17:36 |
| "#define" not working.."sbit" works | Yash Chitalia | 01/18/10 23:32 |
| Yes, you were correct originally! | Andy Neil | 01/19/10 01:22 |
| Seconded | Andy Neil | 01/18/10 12:45 |
| Servo_0.1.zip | Murray R. Van Luyn | 01/18/10 15:02 |
links | James Hinnant | 02/18/10 21:10 |
| Eventually feed the guys at http://servomaster.sf.net ? | Frieder Ferlemann | 01/18/10 15:12 |
| servomaster.sf.net FLOSS | James Hinnant | 02/04/10 11:48 |
| Maybe of some use... | James Bowmaster | 02/10/10 14:40 |
| Whoops... found a bug | James Bowmaster | 02/10/10 16:35 |
| What bug? | Andy Neil | 02/10/10 16:41 |
| Bug | James Bowmaster | 02/10/10 18:47 |
| Improved version uploaded | James Bowmaster | 02/12/10 21:26 |