| Andy Peters 01/18/10 12:52 Read: 112 times Tucson, Az USA |
#172555 - output Responding to: Yash Chitalia's previous message |
Yash Chitalia said:
Yes, I did notice that the chip runs on 3.3V. And the output at the pins will therefore be around 2.5 volts. Servo control will become quite a difficulty in that case. The SiLabs micro outputs will be very near 3.3V when high, not 2.5V, as they are not LVTLL. RTFM for your servo amplifier, as these output levels may be sufficient. =a |
| Topic | Author | Date |
| Controlling multiple servo motors | Yash Chitalia | 01/17/10 14:47 |
| executing code takes time | Erik Malund | 01/17/10 15:27 |
| PWM code | Steve M. Taylor | 01/17/10 15:35 |
| Thanks...now, about the PCA timer.. | Yash Chitalia | 01/17/10 16:06 |
| If SDCC Then Keil | Michael Karas | 01/17/10 16:15 |
| PWM IRQ code in C, bitops, 45 byte | Frieder Ferlemann | 01/18/10 05:19 |
| Optimization having no effect. | Yash Chitalia | 01/18/10 11:36 |
| PWM IRQ code in C, lookup table, 32 byte | Frieder Ferlemann | 01/18/10 05:29 |
| I haven't understood the table lookup concept very well... | Yash Chitalia | 01/19/10 00:55 |
| table lookup | Frieder Ferlemann | 01/19/10 02:39 |
| PWM IRQ code in C, lookup table, 30 byte | Frieder Ferlemann | 01/19/10 03:07 |
| Compiler specifics | Andy Neil | 01/19/10 04:35 |
| absolutely-locating xdata at 256 byte boundary | Frieder Ferlemann | 01/19/10 05:00 |
| I see. | Andy Neil | 01/19/10 06:34 |
| An example code.. | Yash Chitalia | 01/20/10 02:20 |
| Keil: Specifics and non-specifics | Andy Neil | 01/20/10 02:50 |
| Not really working... | Yash Chitalia | 01/20/10 03:55 |
| Enough power? | Per Westermark | 01/20/10 09:45 |
| RE: running 32 servo motors | Andy Neil | 01/20/10 10:34 |
| The chip sounds perfect... | Yash Chitalia | 01/18/10 11:47 |
| not worth it | Erik Malund | 01/18/10 12:10 |
| Servo control will become difficult then... | Yash Chitalia | 01/18/10 12:42 |
| output | Andy Peters | 01/18/10 12:52 |
| HCT chips have ... | Erik Malund | 01/18/10 14:12 |
| Eval a concept with a single PCA and 3:8 HCT multiplexer? | Frieder Ferlemann | 01/18/10 14:36 |
| Check their website | Andy Neil | 01/18/10 14:44 |
| Here is the code... | Yash Chitalia | 01/18/10 15:28 |
| "sbit MTRS=P2^0;" is not OK here | Frieder Ferlemann | 01/18/10 16:11 |
| Keil syntax? | Andy Neil | 01/18/10 17:36 |
| "#define" not working.."sbit" works | Yash Chitalia | 01/18/10 23:32 |
| Yes, you were correct originally! | Andy Neil | 01/19/10 01:22 |
| Seconded | Andy Neil | 01/18/10 12:45 |
| Servo_0.1.zip | Murray R. Van Luyn | 01/18/10 15:02 |
links | James Hinnant | 02/18/10 21:10 |
| Eventually feed the guys at http://servomaster.sf.net ? | Frieder Ferlemann | 01/18/10 15:12 |
| servomaster.sf.net FLOSS | James Hinnant | 02/04/10 11:48 |
| Maybe of some use... | James Bowmaster | 02/10/10 14:40 |
| Whoops... found a bug | James Bowmaster | 02/10/10 16:35 |
| What bug? | Andy Neil | 02/10/10 16:41 |
| Bug | James Bowmaster | 02/10/10 18:47 |
| Improved version uploaded | James Bowmaster | 02/12/10 21:26 |