| Andy Neil 01/20/10 02:50 Modified: 01/20/10 02:51 Read: 236 times Basingstoke Uk |
#172610 - Keil: Specifics and non-specifics Responding to: Yash Chitalia's previous message |
Yash Chitalia said:
This code is not getting compiled in Keil. The error shown is 'missing ";" before "_at" ', which is probably due to the difference in the syntax of Keil and SDCC. Yes - this has already been explained: http://www.8052.com/forum/read/172589 http://www.8052.com/forum/read/172582 This is why it's so important for both you to clearly state what compiler you use, and people supplying "sample" code to state what compiler(s) it's intended for! For specific Keil details, you obviously need to study the Keil manuals: http://www.keil.com/support/man_c51.htm Keil's proprietary language extensions in C51 are all listed here: http://www.keil.com/support/m...nsions.htm 1) I searched for the right syntax for initializing the lookup in Keil but couldn't find it. That's because there isn't any - Keil (and SDCC) is perfectly standard in this respect! |
| Topic | Author | Date |
| Controlling multiple servo motors | Yash Chitalia | 01/17/10 14:47 |
| executing code takes time | Erik Malund | 01/17/10 15:27 |
| PWM code | Steve M. Taylor | 01/17/10 15:35 |
| Thanks...now, about the PCA timer.. | Yash Chitalia | 01/17/10 16:06 |
| If SDCC Then Keil | Michael Karas | 01/17/10 16:15 |
| PWM IRQ code in C, bitops, 45 byte | Frieder Ferlemann | 01/18/10 05:19 |
| Optimization having no effect. | Yash Chitalia | 01/18/10 11:36 |
| PWM IRQ code in C, lookup table, 32 byte | Frieder Ferlemann | 01/18/10 05:29 |
| I haven't understood the table lookup concept very well... | Yash Chitalia | 01/19/10 00:55 |
| table lookup | Frieder Ferlemann | 01/19/10 02:39 |
| PWM IRQ code in C, lookup table, 30 byte | Frieder Ferlemann | 01/19/10 03:07 |
| Compiler specifics | Andy Neil | 01/19/10 04:35 |
| absolutely-locating xdata at 256 byte boundary | Frieder Ferlemann | 01/19/10 05:00 |
| I see. | Andy Neil | 01/19/10 06:34 |
| An example code.. | Yash Chitalia | 01/20/10 02:20 |
| Keil: Specifics and non-specifics | Andy Neil | 01/20/10 02:50 |
| Not really working... | Yash Chitalia | 01/20/10 03:55 |
| Enough power? | Per Westermark | 01/20/10 09:45 |
| RE: running 32 servo motors | Andy Neil | 01/20/10 10:34 |
| The chip sounds perfect... | Yash Chitalia | 01/18/10 11:47 |
| not worth it | Erik Malund | 01/18/10 12:10 |
| Servo control will become difficult then... | Yash Chitalia | 01/18/10 12:42 |
| output | Andy Peters | 01/18/10 12:52 |
| HCT chips have ... | Erik Malund | 01/18/10 14:12 |
| Eval a concept with a single PCA and 3:8 HCT multiplexer? | Frieder Ferlemann | 01/18/10 14:36 |
| Check their website | Andy Neil | 01/18/10 14:44 |
| Here is the code... | Yash Chitalia | 01/18/10 15:28 |
| "sbit MTRS=P2^0;" is not OK here | Frieder Ferlemann | 01/18/10 16:11 |
| Keil syntax? | Andy Neil | 01/18/10 17:36 |
| "#define" not working.."sbit" works | Yash Chitalia | 01/18/10 23:32 |
| Yes, you were correct originally! | Andy Neil | 01/19/10 01:22 |
| Seconded | Andy Neil | 01/18/10 12:45 |
| Servo_0.1.zip | Murray R. Van Luyn | 01/18/10 15:02 |
links | James Hinnant | 02/18/10 21:10 |
| Eventually feed the guys at http://servomaster.sf.net ? | Frieder Ferlemann | 01/18/10 15:12 |
| servomaster.sf.net FLOSS | James Hinnant | 02/04/10 11:48 |
| Maybe of some use... | James Bowmaster | 02/10/10 14:40 |
| Whoops... found a bug | James Bowmaster | 02/10/10 16:35 |
| What bug? | Andy Neil | 02/10/10 16:41 |
| Bug | James Bowmaster | 02/10/10 18:47 |
| Improved version uploaded | James Bowmaster | 02/12/10 21:26 |