| Maarten Brock 02/08/10 13:16 Read: 121 times Tilburg The Netherlands |
#172980 - SiLabs Responding to: Erik Malund's previous message |
They have several with an internal Voltage Regulator. They all support 5V push-pull. Select VREG in their parametric search and many show up. Choose 9x9 and only the solderable LQFP remain.
http://www.silabs.com/products/...earch.aspx The good thing is that they are small, fast, have in-system-debugging and require almost no external parts (only bypass cap and maybe some pullups on /RST and C2D). Maarten |
| Topic | Author | Date |
| 5v Flash 8051 (low pin count) | Grant Beattie | 02/03/10 15:36 |
| NXP: LPC9xx? | Andy Neil | 02/03/10 15:56 |
| Older? | Neil Kurzman | 02/03/10 17:12 |
| WHY 5v??? | Erik Malund | 02/03/10 18:26 |
| Yes they have the M8 core | Grant Beattie | 02/04/10 08:10 |
| SiLabs Parts Can Interface 5V logic | Michael Karas | 02/03/10 22:10 |
| re SILabs | Erik Malund | 02/04/10 10:00 |
SiLabs | Maarten Brock | 02/08/10 13:16 |
| LPC900 are 5V input tolerant | Joe Gold | 02/04/10 06:18 |
| See App Note cited earlier | Andy Neil | 02/04/10 07:23 |
| 5-volt LP9xx1? | Jan Waclawek | 02/04/10 15:14 |
| check also | Stefan KAnev | 02/05/10 03:33 |