Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Michael Karas
11/02/11 08:00
Modified:
  11/02/11 08:03

Read: 502 times
Beaverton Or
USA


 
#184517 - Good Advice
Responding to: Per Westermark's previous message
Per Westermark said:
Low or high quantity - I would recommend a single ADC with multiplexed inputs.

It will normally give less variance between the multiplexed inputs, that multiple ADC does. Remember that multiple ADC requires you to connect your single voltage reference to all ADC in a noise-free manner.

Next thing is that a single ADC means that you have a single set of errors from nonlinearity, and non-uniform step sizes. With multiple ADC, they can have different characteristics.


This is good advice. I mentioned it before but it seems to have been lost in the non-linear noise of this discussion. See here http://www.8052.com/forum/read/184455.

The single A/D, with a single reference voltage source, is almost a necessity when you decide to do the summations in the MCU firmware. The separate A/D idea for each channel leads back once again to there being multiple paths, each having its own error budget, that make any possible compensation and calibration more complicated.

Now of course if each A/D and its attached reference voltage were perfect components you could do almost anything you wanted. But by now most of us know how far from perfect these things actually are!!

Michael Karas


List of 58 messages in thread
TopicAuthorDate
Load-cell conditioning / summing      Zeeshan Ashraf      10/29/11 10:29      
   what is that?      Erik Malund      10/29/11 15:43      
      RE: #184430 - what is that?      Zeeshan Ashraf      10/29/11 15:45      
         then say what you mean      Erik Malund      10/29/11 15:53      
            your description leaves something unclear      Erik Malund      10/29/11 16:02      
               RE: #184435 - your description leaves something unclear      Zeeshan Ashraf      10/29/11 16:27      
                  where are the loadcells???      Erik Malund      10/30/11 06:08      
                     RE:      Zeeshan Ashraf      10/30/11 09:01      
      RE: #184430 - what is that?      Zeeshan Ashraf      10/29/11 15:56      
         some Q/A      Stefan KAnev      10/30/11 14:14      
            RE      Zeeshan Ashraf      10/30/11 15:27      
               Q/A 2      Stefan KAnev      10/31/11 03:00      
                  RE      Zeeshan Ashraf      10/31/11 04:18      
                     re re      Stefan KAnev      10/31/11 05:00      
                     get rid of that summing amp      Erik Malund      10/31/11 07:09      
               you will be lucky to get 16 bits      Erik Malund      10/31/11 07:04      
                  Precision again...      Kai Klaas      10/31/11 16:58      
                     Comparison      Per Westermark      11/01/11 01:12      
                     RE      Zeeshan Ashraf      11/01/11 02:20      
                        why do you keep babbling about a summing amp      Erik Malund      11/01/11 06:41      
                        Priorities...        Kai Klaas      11/01/11 07:07      
                           RE      Zeeshan Ashraf      11/01/11 07:45      
                              cirrus, ti      Stefan KAnev      11/01/11 08:42      
                                 maxim, linear tech, Analog Devices      Erik Malund      11/01/11 10:09      
                                 RE      Zeeshan Ashraf      11/01/11 17:36      
                              it takes the same time ...      Erik Malund      11/01/11 10:14      
               500 running foot of cable      Stefan KAnev      11/01/11 22:25      
                  RE      Zeeshan Ashraf      11/01/11 22:57      
                     Go for ADC with multiplexed inputs instead of multiple ADC        Per Westermark      11/02/11 07:14      
                        Good Advice      Michael Karas      11/02/11 08:00      
                           It depends...      Kai Klaas      11/02/11 08:48      
                              This is a MODULAR concept !      Zeeshan Ashraf      11/02/11 19:57      
                                 it depends      Stefan KAnev      11/03/11 00:50      
                                 don't be ridiculous      Erik Malund      11/03/11 07:17      
                                    Consider other parameters too.      Zeeshan Ashraf      11/03/11 08:16      
                                       calibration      Stefan KAnev      11/03/11 08:46      
                                       if you do not buy bootleg parts ...      Erik Malund      11/03/11 08:50      
                                          Voltage reference      Per Westermark      11/03/11 09:08      
            Accuracy...      Kai Klaas      10/30/11 16:40      
               RE      Zeeshan Ashraf      10/30/11 16:55      
                  Keep the signal paths as simple as possible.      Michael Karas      10/30/11 20:34      
                  sun umbrella      Stefan KAnev      10/31/11 03:10      
   Separate Gain Paths - Not The Best      Michael Karas      10/29/11 23:33      
      RE: #184439 - Separate Gain Paths - Not The Best      Zeeshan Ashraf      10/30/11 00:11      
         Error Budget Calculations?      Michael Karas      10/30/11 09:50      
            Hysteresis      Kai Klaas      10/30/11 10:14      
         This should alarm you!      Kai Klaas      10/30/11 09:58      
            RE      Zeeshan Ashraf      10/30/11 10:14      
               No contradiction...      Kai Klaas      10/30/11 10:22      
                  RE      Zeeshan Ashraf      10/30/11 10:40      
                     Digital Summing        Michael Karas      10/30/11 12:55      
               with DC exitacion ...      Erik Malund      10/31/11 07:20      
            welcome on board      Erik Malund      10/31/11 07:14      
      RE:      Zeeshan Ashraf      10/30/11 00:16      
   Look at ADuC845      Oliver Sedlacek      10/31/11 01:44      
      ADuC845      Russell Bull      11/16/11 20:54      
         Noise V good      Oliver Sedlacek      11/17/11 04:39      
            Ok, then      Erik Malund      11/17/11 06:26      

Back to Subject List