Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Jan Waclawek
11/27/11 13:04
Read: 611 times
Bratislava
Slovakia


 
#184927 - reset circuit
Responding to: ???'s previous message
The weakness of RC reset is that it does not unconditionally provide a clean pulse. The button may be bouncing and the RC reset may be unadequate to capture the bounces and provide a clean reset. And as the bouncing has mechanical causes, this may change in time.

I assume you are not prepared to replace the RC reset by a proper reset IC, such as the venerable 7705, which would probably be a definitive solution. You can try to experiment with the values of R and C (e.g. removing the R altogether - there is builtin R of around 100kOhm anyway), but there's no guarantee this will definitively help.

JW


List of 25 messages in thread
TopicAuthorDate
P89V51RD2 And Flash Magic      Arif Deshmukh      11/26/11 18:48      
   please suggest      Andy Neil      11/26/11 23:27      
   reset button      Jan Waclawek      11/27/11 01:52      
      Reset Button      Arif Deshmukh      11/27/11 09:26      
         reset circuit      Jan Waclawek      11/27/11 13:04      
            That's the fundamental flaw with RC resets!      Andy Neil      11/28/11 14:40      
   Use a MAX700      Matthias Arndt      11/29/11 00:15      
      Rest supervisor        Steve M. Taylor      11/29/11 03:56      
         How Many Times      Michael Karas      11/29/11 05:03      
            This will continue until ...      Richard Erlacher      11/29/11 15:08      
               Power dip      Per Westermark      11/30/11 05:01      
                  real, but worse if flash      Erik Malund      11/30/11 07:17      
                  note, that here the main problem is NOT power related...      Jan Waclawek      11/30/11 07:17      
                     Yes      Per Westermark      11/30/11 07:42      
                        the ultimate joke      Erik Malund      11/30/11 08:20      
                           SiLabs watchdog      Andy Peters      11/30/11 09:25      
                              clarification      Erik Malund      11/30/11 09:43      
                                 Beware flash erase time      Maarten Brock      12/01/11 10:03      
                           brownout detection      Maarten Brock      12/01/11 10:07      
                              well,      Erik Malund      12/01/11 10:09      
                  It's not the spec's ... it's the lack of them.      Richard Erlacher      11/30/11 12:43      
   Reset Chip?      Arif Deshmukh      11/29/11 21:04      
      Why Ask???      Michael Karas      11/29/11 21:33      
         Thanks      Arif Deshmukh      11/30/11 00:29      
            a plethora of possible chips      Erik Malund      11/30/11 07:19      

Back to Subject List