Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
01/12/12 01:55
Modified:
  01/12/12 03:08

Read: 556 times


 
#185446 - That is called edit mode
Responding to: ???'s previous message
Isn't the thing ?

You can do it in following manner.

When you Press 4th button write some code about blinking first digit.That would be the indication of which digit you are going to change.You right now have given some address to individual digit in your software.Now when you push 1st or 2nd button increace or decrease the value of that address (Here in this case 1st digit's value).Lock the limit between 0 to 9 (as you might already have done).Store that edited value in some specific register that might not affect your present set value.

Now again press the 4th push button & blink second digit and change the value as described above.
Same way you can edit all 4 digits or wahtever the nos. now after edittting all the digits again pressing 4th push button will replace current set value with the edited one.You may store this value in memory IC at this time.

Note:

This is only the hint of how one can edit the digits.But mostly it depends on application demands.

You can reffer your text book or reference book for such examples.

Best wishes

from

Maunik Choksi

List of 44 messages in thread
TopicAuthorDate
switch interfacing      Anil Kumar      01/11/12 00:38      
   What?      Per Westermark      01/11/12 00:58      
      switch interfacing      Anil Kumar      01/11/12 01:39      
         The 7-segment digits will not handle switches      Per Westermark      01/11/12 02:57      
   Perhaps this may be useful to you      Maunik Choksi      01/11/12 03:53      
      4 buttons - not full keypad      Per Westermark      01/11/12 04:39      
         switch interfacing      Anil Kumar      01/12/12 00:06      
            That is called edit mode      Maunik Choksi      01/12/12 01:55      
               switch interfacing      Anil Kumar      01/12/12 22:50      
                  You need to study some examples      Maunik Choksi      01/12/12 23:51      
                     switch interfacing      Anil Kumar      01/13/12 00:10      
                  Details details - and where is debounce/repeat handling?      Per Westermark      01/13/12 01:20      
                     switch interfacing      Anil Kumar      01/14/12 00:59      
            Why should this be a problem??      Kai Klaas      01/12/12 07:53      
            interfacing your switches has nothing to do with LED's      Richard Erlacher      01/12/12 22:02      
   MUX LED AS O/P PIN      Satish S Munot      01/14/12 19:47      
      Switch interfacing      Anil Kumar      01/19/12 23:19      
         divide and conquer      Mahmood Elnasser      01/20/12 01:35      
         simplified step-by-step way to post your schematic        KONSTANTINOS L. ANGELIS      01/20/12 02:12      
            remember      Erik Malund      01/20/12 07:31      
               ? Not Muxing ?      Michael Karas      01/20/12 08:17      
   switch interfacing      Anil Kumar      01/21/12 01:57      
      You need lots of resistors      David Prentice      01/21/12 04:34      
         (Back to) Basics      Andy Neil      01/21/12 05:17      
            multiplex 5 digits      David Prentice      01/21/12 05:43      
               Don't think anyone would want 1:35 degenerate "multiplexing"      Per Westermark      01/21/12 05:52      
                  Have I done the sums wrong?      David Prentice      01/21/12 06:06      
                     No but multiplexing requires few driver lines      Per Westermark      01/21/12 06:17      
                        You MUST have digit drvers      David Prentice      01/21/12 07:00      
                           You missed '4094 OE+PWM for luminocity      KONSTANTINOS L. ANGELIS      01/21/12 09:47      
               No multiplexing needed...      Kai Klaas      01/21/12 07:33      
                  switch interfacing      Anil Kumar      01/21/12 07:46      
                     What help?      Andy Neil      01/21/12 08:33      
                     how?      Erik Malund      01/21/12 08:34      
                     Ah, a homework, right?      Kai Klaas      01/21/12 09:21      
                        switch interfacing      Anil Kumar      01/21/12 09:55      
                           language?      Erik Malund      01/21/12 10:37      
                           i have no logical idea how i write code      Andy Neil      01/21/12 10:40      
                           You need...      Kai Klaas      01/22/12 07:07      
                              Making a seven segment display blink      Andy Neil      01/22/12 07:19      
                                 The 4094 chip has an OE pin      David Prentice      01/22/12 07:48      
                              switch interfacing      Anil Kumar      01/22/12 10:57      
   switch interfacing      Anil Kumar      01/31/12 22:07      
      would you provide some feedback ?      KONSTANTINOS L. ANGELIS      02/01/12 03:35      

Back to Subject List