Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Rob Klein
02/01/12 14:04
Read: 307 times
Zaandam
The Netherlands


 
Msg Score: +1
 +1 Good Answer/Helpful
#185765 - Oh, boohoo!
Responding to: ???'s previous message
Your Atmel part works exactly the same as any other 8051 based part for the past three decades. Thousands upon thousands of designs have been based around it, selling countless millions of devices.

But you just didn't bother to read the datasheet and you dismiss offhand the fine solutions Michael has provided you (which, incidentally, is probably used in more than 75% of all 8051 based designs) because you "don’t want to use Low-Active Design". Then you go on and show you have no idea what you're actually talking about, seeing as how your "cold solder joint" would not cause the situation you describe.

"What can I say" you ask. Well, I think you shouldn't say anything for a while. Just stop stamping your li'l feet like a three-year old and start doing the right thing, which is, much as you may deplore it, using the correct hardware solution, such as has been kindly handed to you by Michael.


- Rob.

List of 34 messages in thread
TopicAuthorDate
Power-On Port Status Problem      Adam Blue      01/30/12 08:42      
   Wrong idea      Per Westermark      01/30/12 08:48      
   you will not      Erik Malund      01/30/12 08:49      
   you are not the only one      Erik Malund      01/30/12 09:18      
   ATMEL be ashamed      Adam Blue      01/30/12 15:05      
      No, YOU should be ashamed...      Kai Klaas      01/30/12 16:15      
      Nonsense!        Andy Neil      01/30/12 16:46      
      PIC Does so      Neil Kurzman      01/30/12 23:08      
         Oh really??      Michael Karas      01/31/12 07:46      
            "Glitch" in the sense of kind of "setback in a plane"?      Kai Klaas      01/31/12 10:19      
   Try These Ideas        Michael Karas      01/30/12 17:21      
   "Glitch"      Adam Blue      02/01/12 13:12      
      what is not “ATMEL true”.      Erik Malund      02/01/12 13:37      
      I think you are making excuses      Erik Malund      02/01/12 13:41      
      Oh, boohoo!        Rob Klein      02/01/12 14:04      
      What a bunch of fatty sausage...      Michael Karas      02/01/12 14:59      
      "very easy problem"      Andy Neil      02/01/12 15:02      
   Power-On Glitch      Adam Blue      02/01/12 15:40      
      Nonsense - again      Andy Neil      02/01/12 16:28      
      Please explain what the "power-on glitch" is ...      Richard Erlacher      02/01/12 19:26      
      Into The Frying Pan        Michael Karas      02/01/12 20:52      
      Power-on problem...      Kai Klaas      02/02/12 05:55      
      You are still blaming the tools      Per Westermark      02/03/12 05:55      
   Design the hardware first.      David Prentice      02/02/12 07:21      
      do not Design the hardware first.      Erik Malund      02/02/12 07:30      
   Power-On Glitch      Adam Blue      02/02/12 15:07      
      that you had the worst possible reset circuit      Erik Malund      02/02/12 15:59      
      RC-reset...      Kai Klaas      02/02/12 17:20      
      Sorry, double post, don't know why...      Kai Klaas      02/02/12 17:21      
         No, you're not the only one      Richard Erlacher      02/02/12 21:12      
      Would I Hire?      Michael Karas      02/02/12 22:44      
         incidentially      Erik Malund      02/03/12 07:09      
   Power On satus Problem      Satish S Munot      02/29/12 10:16      
      echo, echo, echo      Erik Malund      02/29/12 10:30      

Back to Subject List