Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Richard Erlacher
10/14/12 12:09
Read: 818 times
Denver, Co
USA


 
#188642 - I might be just a bit concerned about the conversion rate
Responding to: Hal Albach's previous message
Unless he knows for certain that a faster completion of the conversion won't screw up things within the probably unknown firmware, that might be a problem.

I would probably buy the "real McCoy" in this case, provided he's telling the truth about simply wanting to acquire a replacement in order to effect repairs.

If he has access to the firmware that operates this circuit, he'll have little trouble with that aspect.

RE


List of 27 messages in thread
TopicAuthorDate
About AD574A      Akhil Bose      10/08/12 09:16      
   suitable      Neil Kurzman      10/08/12 16:28      
   price/performance      Erik Malund      10/09/12 07:40      
      Expensive or old      Neil Kurzman      10/09/12 15:58      
         if it's not "obsolete" it probably should be      Richard Erlacher      10/09/12 23:26      
            It's not obsolete      Andy Neil      10/10/12 00:38      
               I wonder what's keeping it "alive"      Richard Erlacher      10/10/12 07:36      
                  It became an industry standard...      Kai Klaas      10/10/12 12:44      
                     LM358      Mahmood Elnasser      10/10/12 14:10      
                        Dated      Michael Karas      10/10/12 16:11      
   'Find Similar Parts'      Andy Neil      10/10/12 00:44      
      I did not find any matching IC      Akhil Bose      10/13/12 17:10      
         Be Happy        Michael Karas      10/14/12 08:26      
            Ok so,      Akhil Bose      10/14/12 08:44      
               No, that's not what it means!      Richard Erlacher      10/14/12 10:35      
         RE: None of them match the Pin structure      Andy Neil      10/15/12 09:36      
   Maxim?      Hal Albach      10/14/12 11:04      
      I might be just a bit concerned about the conversion rate      Richard Erlacher      10/14/12 12:09      
   if it is repair, who cares      Erik Malund      10/15/12 10:20      
      There are places where that's a week's pay      Richard Erlacher      10/16/12 07:53      
         sure ...      Erik Malund      10/16/12 08:59      
            What was the goal?      Neil Kurzman      10/16/12 10:35      
            just a minute ..      Richard Erlacher      10/17/12 11:28      
   Ok ... so here is what i would do      Akhil Bose      10/17/12 07:36      
      then why the worry about the pinout ?        Erik Malund      10/17/12 07:41      
         Thanks Guys      Akhil Bose      10/17/12 10:07      
            you probably should back away from the original      Richard Erlacher      10/17/12 11:31      

Back to Subject List