Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Kai Klaas
12/02/12 05:31
Read: 903 times
Germany


 
#188942 - Power-on slope rate...
Responding to: Richard Erlacher's previous message
Richard said:
I've done a limited amount of fiddling with the notion of controlling the rise and fall of Vcc, using transistors to pull down Vcc to the MCU whenever RESET goes active, but I've not convinced myself that all the bases are covered when that's done.

Power-on slope rate should be something between about 0,01V/msec and 10V/msec, dependent on actual micro. Not faster and not slowlier. A microcontroller is a hihgly dynamically working thing. Many hidden micro subroutines are running in the behind, charge pumps, oscillators, sequencers, etc. I'm sure that the developers of microcontrollers need a certain narrow window of power-on slope rate to manage all these internal issues when powering up the micro. And Vcc should start from 0V on...

Kai Klaas

List of 33 messages in thread
TopicAuthorDate
C8051F231 experiences      Daniel Contarino      11/30/12 14:43      
   another solution      Erik Malund      11/30/12 15:11      
   The probabilities are low...      Daniel Contarino      11/30/12 18:34      
      think about what happens when you add a finger      Richard Erlacher      11/30/12 22:55      
         The point is ...      Daniel Contarino      12/01/12 03:08      
            Yes ... the underlying issue is the flash ...       Richard Erlacher      12/01/12 11:28      
               Out of my office, but...      Daniel Contarino      12/01/12 14:05      
                  Don't think in Vcc, ESD or hum...      Daniel Contarino      12/02/12 09:24      
   Apparently several C8051F2xx parts have the same pinout      Richard Erlacher      12/01/12 14:25      
   Characteristic for in system programmable flash micros...      Kai Klaas      12/01/12 18:25      
      All too true ... sadly ...       Richard Erlacher      12/01/12 20:13      
         Power-on slope rate...      Kai Klaas      12/02/12 05:31      
            Sorry, my post should be here, no up there...      Daniel Contarino      12/02/12 09:58      
            Have you any basis for that rate?      Richard Erlacher      12/02/12 10:15      
               Vdd ramp time      Maarten Brock      12/03/12 06:15      
               Some datasheets show numbers...      Kai Klaas      12/03/12 07:05      
                  Those aren't the "usual" 805x-core MCU's      Richard Erlacher      12/03/12 17:43      
                     There aren't many "usual" 8051-cores anymore...      Kai Klaas      12/03/12 18:13      
                        How dangerous power ups can be...      Kai Klaas      12/04/12 06:20      
                           I believe it      Richard Erlacher      12/04/12 08:59      
                              (dV/dt) examples      Jim Granville      12/04/12 13:14      
                                 They don't know it either...      Kai Klaas      12/04/12 18:49      
                                    dV/dT etc       Jim Granville      12/04/12 21:39      
                                       reset request...      Kai Klaas      12/05/12 06:21      
                                          That's what disturbs me greatly      Richard Erlacher      12/06/12 00:19      
                                             It IS disturbing!      Kai Klaas      12/06/12 08:02      
                                                Where this began ... at least for me ...       Richard Erlacher      12/06/12 09:43      
                                                   So, you took the hard road...      Kai Klaas      12/06/12 10:41      
                                                      We've all had that experience       Richard Erlacher      12/06/12 16:23      
   probable cause      Brent Wilson      02/04/13 20:32      
      Brent, this is very nice      Erik Malund      02/05/13 06:38      
         forum no longer down      Maarten Brock      02/05/13 07:33      
      Thank you!      Daniel Contarino      02/05/13 15:04      

Back to Subject List