Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Erik Malund
12/26/12 17:27
  12/26/12 17:27

Read: 964 times
Mt Airy, Nc

#189038 - differences I recall
Responding to: Steve M. Taylor's previous message
the input for an external clock is XTAL2
the UARTS and the I²C are totally different
there are different clockings for T1 and T0, I do not recall what the default is
RCAP is changed and renamed
The watchdog must be disabled in startup.a51 (most often)
The PCA is back to the Intel type (except for clocking) su the PCA cookbook is valid

Have you checked your settings against the result from the config program


List of 10 messages in thread
Silabs C8051F300      Steve M. Taylor      12/26/12 14:42      
   differences I recall      Erik Malund      12/26/12 17:27      
      Settings      Steve M. Taylor      12/27/12 04:21      
         watch the peripherals      Maarten Brock      12/27/12 07:09      
            Done that      Steve M. Taylor      12/27/12 07:25      
   suggestions      Erik Malund      12/27/12 08:05      
      TF1      Steve M. Taylor      12/27/12 10:00      
         Found it.       Steve M. Taylor      12/27/12 10:29      
            yes      Erik Malund      12/27/12 11:37      
            RE: single line execution in 'C' ?      Andy Neil      12/31/12 06:08      

Back to Subject List