Email: Password: Remember Me | Create Account (Free)


 

Back to Subject List

Thread Closed: Issue successfully resolved

Michael Karas
04/11/04 04:24
Read: 387 times


 		 #68301 - RE: ULN2803.
Responding to: Michael Karas's previous message
Yeah Steve....It can be done. I would tend to only use this paralleling capability when the load is largly resistive. Inductive loads could lead to problems if high frequency AC components are feeding back to the driver(s) and there is any imbalance in PC board trace characteristics and IC package lead frame characteristics.

Michael Karas


List of 47 messages in thread
TopicAuthorDate
ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/06/04 11:08      
   RE: ULN2803 Output droping at 3KHz.      Steve M. Taylor      04/06/04 11:58      
      RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/06/04 12:07      
         RE: ULN2803 Output droping at 3KHz.      Erik Malund      04/06/04 12:10      
            RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/06/04 12:21      
         RE: ULN2803 Output droping at 3KHz.      Steve M. Taylor      04/06/04 12:30      
            RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/06/04 12:40      
               RE: ULN2803 Output droping at 3KHz.      Steve M. Taylor      04/06/04 14:55      
            RE: ULN2803 Output droping at 3KHz.      Erik Malund      04/06/04 12:44      
               RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/06/04 12:51      
                  RE: ULN2803 Output droping at 3KHz.      Erik Malund      04/06/04 12:54      
   RE: ULN2803 Output droping at 3KHz.      Charles Bannister      04/06/04 12:20      
      RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/06/04 12:36      
         RE: ULN2803 Output droping at 3KHz.      Steve M. Taylor      04/06/04 12:55      
            RE: ULN2803 Output droping at 3KHz.      Erik Malund      04/06/04 13:08      
   RE: ULN2803 Output droping at 3KHz.      IJAZ AHMED      04/06/04 13:32      
      RE: ULN2803 Output droping at 3KHz.      Christian Kleiber      04/06/04 14:05      
         RE: ULN2803 Output droping at 3KHz.      Erik Malund      04/06/04 14:25      
   RE: ULN2803 Output droping at 3KHz.      Jacob Boyce      04/06/04 16:08      
      RE: ULN2803 Output droping at 3KHz.      Erik Malund      04/06/04 16:11      
         RE: ULN2803 Output droping at 3KHz.      Jacob Boyce      04/06/04 16:12      
            RE: ULN2803 Output droping at 3KHz.      Steve M. Taylor      04/06/04 16:53      
               RE: ULN2803 Output droping at 3KHz.      Jacob Boyce      04/07/04 08:03      
   RE: ULN2803 Output droping at 3KHz.      Terry Lingle      04/06/04 19:58      
   RE: ULN2803 Output droping at 3KHz.      Oleg Sergeev      04/07/04 02:10      
      RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/07/04 04:43      
   RE: ULN2803 Output droping at 3KHz.      Alexander Riabokris      04/07/04 09:16      
      RE: Schematic would help us      IJAZ AHMED      04/07/04 14:02      
   CNY17-3 is the culprit!      Kai Klaas      04/07/04 18:15      
      RE: CNY17-3 is the culprit!      IJAZ AHMED      04/10/04 14:36      
         RE: CNY17-3 is the culprit!      Kai Klaas      04/10/04 16:09      
            RE: CNY17-3 is the culprit!      Michael Karas      04/10/04 22:04      
   RE: ULN2803 Output droping at 3KHz.      Michael Karas      04/08/04 04:25      
      May be Prahlad will inform us now?      Kai Klaas      04/08/04 06:54      
      RE: ULN2803 Output droping at 3KHz.      Prahlad J. Purohit      04/09/04 03:13      
         RE: ULN2803 Output droping at 3KHz.      Steve M. Taylor      04/09/04 04:14      
         RE: ULN2803 Output droping at 3KHz.      Michael Karas      04/09/04 06:32      
   RE: ULN2803 Output droping at 3KHz.      Jacob Boyce      04/09/04 07:54      
      We are still waiting for more details      Kai Klaas      04/09/04 19:18      
         3 kHz ? Stepper motor ?      Raghunathan R      04/10/04 01:00      
      RE: ULN2803.      Abdul Mujid      04/10/04 22:58      
         RE: ULN2803.      Steve M. Taylor      04/11/04 03:51      
         RE: ULN2803.      Michael Karas      04/11/04 03:58      
            RE: ULN2803.      Steve M. Taylor      04/11/04 04:11      
         RE: ULN2803.      Michael Karas      04/11/04 04:14      
            RE: ULN2803.      Michael Karas      04/11/04 04:24      
   RE: ULN2803 Output droping at 3KHz.      Prahlad Purohit      04/11/04 21:15      

Back to Subject List