Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Manoz Joshi
08/29/05 19:08
Read: 1166 times


 
#100258 - Hardware UART
Responding to: Dan Henry's previous message
Dan Henry said:
Manoz Joshi said:
I just only want software UART (bit-banging) for my receiver that's all.

What would you have the bit-banged UART do that the hardware UART does not do?


Okay, I tell what happened. I tried to implement serial communication using with hardware UART in order to transmit simple byte to another microcontroller with RLP-434 which also implement hardware UART. In my transmitter code, I simply send two different byte (0x01 and 0x02) which forece my receiver to switch red LED on and off, delay few seconds then swithc blue LED on and off.

I tested it and learnt that the blue or red LED would not switch on. So I suspected it was antenna but I am not 100% sure because I put two core wire about 10 inches in the transmitter and receiver. Since I don't have plenty of money and I prefer to test it with bit-banging (software UART) in order to see if it work better.

According to the data sheet for TLP-434 and RLP-434, it need 5ohm antenna. Can't I make it or I need to buy it?

Max

List of 34 messages in thread
TopicAuthorDate
Serial RF with AT89C51 to AT89C51      Manoz Joshi      08/28/05 07:35      
   Lineks ?      Steve M. Taylor      08/28/05 09:31      
   UARTs and ASK      Dan Henry      08/28/05 09:54      
      Software driven UART - Bit-banging      Manoz Joshi      08/28/05 17:23      
         Channel coding        Dan Henry      08/29/05 07:16      
            Yes but...      Manoz Joshi      08/29/05 13:47      
               What is the hardware UART not doing?      Dan Henry      08/29/05 14:27      
                  Hardware UART      Manoz Joshi      08/29/05 19:08      
                     RF links pose challenges, but anyway...      Dan Henry      08/29/05 20:58      
                     Spend the money or do the hard work?      Andy Neil      08/30/05 00:56      
                        So many, so often, forget that design is      Erik Malund      08/30/05 07:10      
   Rendering      Steve M. Taylor      08/30/05 09:06      
      Me too !      Farshid Jafari Harandi      08/30/05 09:21      
      nope, just like any other (IE)      Erik Malund      08/30/05 11:13      
         Disappointed!      Manoz Joshi      08/30/05 13:58      
            What is the purpose of "learning" our co      Erik Malund      08/30/05 14:40      
            Sorry but      Steve M. Taylor      08/30/05 14:43      
            End of wrong stick?      Andy Neil      08/30/05 16:42      
            Learning? Dealing with disappoinment      Dan Henry      08/30/05 18:01      
            What you need to learn      Andy Neil      08/31/05 03:31      
               Apology      Manoz Joshi      08/31/05 08:03      
                  Recommendation      Andy Neil      08/31/05 09:25      
                  A short backgrounder      Dan Henry      08/31/05 11:26      
                     Missing the point      Russell Bull      09/01/05 03:50      
   The wise men have spoken      Dan Henry      08/30/05 18:09      
   UARTs, the last word Mr. Joshi      Dan Henry      08/30/05 18:13      
      *Groan* Here is my inital code      Manoz Joshi      08/31/05 01:39      
         Does it work ?      Steve M. Taylor      08/31/05 01:53      
            Does it work at all?      Andy Neil      08/31/05 03:53      
         The Point.      Andy Neil      08/31/05 03:46      
            why analyze how deep the water is before      Erik Malund      08/31/05 07:14      
         TF2 needs to be cleared in interrupt      Charles Bannister      08/31/05 04:54      
         the right way to get help definitely is      Erik Malund      08/31/05 07:05      
         Pinching a loaf      Dan Henry      08/31/05 18:47      

Back to Subject List