Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Farshid Jafari Harandi
09/26/05 14:20
Read: 837 times
Sweden
Gothenburg


 
#101572 - Toner Transfer
Responding to: Rob Vassar's previous message
This method is not a reliable way ,anyway it works for DIY prototypiong.
From my experience with DIY Toner Transfer method i could give you some advices that worked for me :

First Heat the initial PCB with an iron about 10-20 mins using a paper in between the iron and PCB.
Then put the Printed Paper on the pcb and continue heating the paper for about 1 mins then move the Iron from place to place for about 10 mins.
it is much beter to wait for the pcb to get cold before taking the paper apart.

another adivce :
make your Cadware to Print Holes ,this will help you much when you're drilling.

Farshid

List of 25 messages in thread
TopicAuthorDate
Toner Transfer PCB's      Rob Vassar      09/26/05 14:03      
   Toner Transfer      Farshid Jafari Harandi      09/26/05 14:20      
      Don't forget      Jon Ledbetter      09/26/05 14:36      
         I used acetone      Rob Vassar      09/26/05 15:05      
         clean copper side      Farshid Jafari Harandi      09/26/05 20:18      
   File Edges of PCB top and bottom.      Charles Bannister      09/27/05 00:33      
      Type of paper used      Ashwin Nayak      10/07/05 10:53      
         PNP BLUE Type thermal paper.      Charles Bannister      10/07/05 12:28      
      Amazing      Vignesh Prasad      10/11/05 08:41      
         Double sided...      Robert Perez      10/11/05 14:34      
         Alignment of Top and Bottom PCB Layers      Charles Bannister      10/11/05 14:35      
            Double sided etching      Vignesh Prasad      10/12/05 11:25      
               Double sided post !      Vignesh Prasad      10/31/05 08:32      
               Q&A double sided etching      Charles Bannister      10/31/05 19:02      
                  Bubble tank        Steve M. Taylor      11/01/05 03:13      
                     Making one with these guidelines      Abhishek Singh      11/01/05 07:43      
                     addendum      Steve M. Taylor      11/01/05 10:16      
                     Like these...      Jon Ledbetter      11/01/05 10:26      
                     Something like this?      Vignesh Prasad      11/01/05 21:46      
                        Yes      Steve M. Taylor      11/02/05 09:41      
                  New methods      Vignesh Prasad      11/01/05 21:49      
         Art Paper      Ashwin Nayak      10/30/05 11:49      
            Blue sheet Vs Photographic paper      Charles Bannister      10/30/05 14:52      
            Timing and Tinning      Vignesh Prasad      10/31/05 08:43      
               Tin your self      Abhishek Singh      10/31/05 21:03      

Back to Subject List