Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Terry Lingle
01/24/06 08:25
Read: 995 times
Clearwater
Canada


 
#108189 - Copper fills
Responding to: Kai Klaas's previous message
At least in my software are primarily intended to reduce etching costs thus they are intentionaly separated from all placed objects.

You may have to add a connecting trace forcing the desired connections.

I error check to no errors then add the desired fill to ground plane via connections. Set the error checking to ignore these errors if possible and manually confirm that there are no errors or missed connections due to this forcing of the software. If your software will not allow you to control the error checking just confirm that all errors reported are intended connections. Again it is your responsibility to check the final output for errors.
Note that in this approach if you fail to connect a via the software will not catch it.
Terry



List of 56 messages in thread
TopicAuthorDate
Circuit Analysis      Suresh R      12/27/05 00:40      
   Analysis      Farshid Jafari Harandi      12/27/05 04:15      
   Dangerous!      Kai Klaas      12/27/05 07:09      
      bungling amateurs "bragging" on the web      Erik Malund      12/27/05 08:55      
         Not electronic, but an amusing example      Joseph Hebert      12/27/05 09:58      
            OLD idea ?      Steve M. Taylor      12/27/05 12:09      
               New and improved      Joseph Hebert      12/27/05 17:11      
                  Safety first      Steve M. Taylor      12/28/05 06:43      
         I think you meant...      Kalpak Dabir      12/27/05 10:01      
         deja vu all over again!      Andy Neil      12/27/05 18:23      
      resistor replaced by capacitor      Suresh R      12/28/05 01:11      
         Phase shift      Kai Klaas      12/28/05 06:30      
         dissapation      Terry Lingle      12/28/05 06:38      
            Dissipation      Steve M. Taylor      12/28/05 06:48      
               It's a real world after all      Terry Lingle      12/28/05 07:11      
                  What ? Make mistakes ?      Steve M. Taylor      12/28/05 07:33      
                     are you sure      Erik Malund      12/28/05 09:05      
                     or ..      Andy Curda      12/29/05 13:21      
            Non ideal cap performance      Kai Klaas      12/28/05 06:58      
   Diodes!      Andy Neil      12/27/05 07:14      
   Current Limiting Capacitor      Joseph Hebert      12/27/05 09:47      
      Capacitor Filters      Suresh R      01/12/06 01:15      
         Some basic theory needed      Kalpak Dabir      01/12/06 01:25      
         12 */~2 ~ 17 so I doubt you see 19V      Erik Malund      01/12/06 06:31      
         Output voltage      Kai Klaas      01/12/06 07:54      
            Regulation      Steve M. Taylor      01/12/06 11:20      
            current flow      Suresh R      01/13/06 00:43      
               What current?      Kai Klaas      01/13/06 06:10      
                  What iam trying to know is      Suresh R      01/15/06 21:29      
                     inrush current      Terry Lingle      01/15/06 23:20      
                     Naiive analysis      Steve M. Taylor      01/16/06 06:33      
                        Laplace Transformation      Kai Klaas      01/16/06 07:19      
                           Could be worse....      Steve M. Taylor      01/16/06 11:39      
                              Me too!      Kai Klaas      01/16/06 11:58      
                                 Minds are failing      Steve M. Taylor      01/16/06 12:28      
                     DC component      Kai Klaas      01/16/06 12:03      
                        Suresh, have as look      Erik Malund      01/16/06 12:18      
                           analog and digital ground      Suresh R      01/17/06 00:24      
                              discussed ad nauseam do a search      Erik Malund      01/17/06 06:56      
                              Use a splitted ground plane      Kai Klaas      01/17/06 07:32      
                                 did i got it right      Suresh R      01/18/06 00:49      
                                    Also datasheet of ADUC can help you      Kai Klaas      01/18/06 06:44      
                                       Placing Vias      Suresh R      01/24/06 00:18      
                                          Maybe..      Kai Klaas      01/24/06 06:08      
                                             Copper fills      Terry Lingle      01/24/06 08:25      
                                          I do not know about 2 layers      Erik Malund      01/24/06 09:09      
                                        Auto route      Suresh R      01/25/06 00:00      
                                          Solid ground plane has to be solid!      Kai Klaas      01/25/06 08:37      
                                             Thank you Kai      Suresh R      01/26/06 21:12      
                                                circuit for a despensing unit      Suresh R      01/28/06 02:58      
                                                   ICM7555 + 2M2 + 68      Kai Klaas      01/28/06 10:14      
                                                      why a totally unrelated post in the midd      Erik Malund      01/30/06 08:07      
                              Separate signal traces.      Joseph Hebert      01/17/06 10:01      
                                 What has God to do with this??      Kai Klaas      01/17/06 19:20      
               DC DC      Steve M. Taylor      01/13/06 06:19      
               DC DC      Steve M. Taylor      01/13/06 06:19      

Back to Subject List