Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Kjell Lofgren
02/13/06 05:57
Read: 655 times

Msg Score: -1
 -1 Off-Topic
#109831 - kanda AVR USB ISP
I have problems with Kanda:s AVR USB ISP programmer.
The ISP programmmer holds my ATmega 162 reset CONSTANTLY.
This is OK if you juste want to program a device and then change device and so on. BUT in my case i first program a PLD then the ATmega and then i run some test and adjustement sequenses. Kanda support has promised to fix this with firmware and a corresponding .DLL Guess what........NOTHING happens....
The current workaround is a switch for the operator to release the reset signal to the microcontroller, after programming

Any suggestions on how i can get rid of the switch.

/ Kjell

List of 5 messages in thread
kanda AVR USB ISP      Kjell Lofgren      02/13/06 05:57      
   Why are you here?      Andy Neil      02/13/06 07:47      
      Sorry!      Kjell Lofgren      02/13/06 08:35      
         OK      Andy Neil      02/13/06 09:28      
   And I told her about you!      Kai Klaas      02/14/06 20:27      

Back to Subject List