Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Suresh R
03/18/06 12:32
Read: 1009 times
Chennai
India


 
#112462 - yes you are right
Responding to: Erik Malund's previous message
Erik Malund said:
was your assignment not to find out how switches withstood inrush current?

yes. for which i need to use some inrush current limiting network to protect the reed switch if it doesnt withstand.

I think resistor parallel to switch could be one option,
since the disadvantage of this method as proposed by kai (large current consumption when switched sequentially) would only happen during testing in my place and since, i came to know that the customer will be using the switch in bikes for indicating some thing ( which would not be sequential)

Also,
for once, i just connected the lamp directly to the 12 V through the reed switch (switch is driven by a driver circuit for ON / OFF operation). i could see only the switch getting closed parmanently.
'NO SWITCHING TOOK PLACE'(note: i just saw how the switch reacts, though the low rating was pointed out in the discussion previously..) and i found the contact opens only when the switch is taken out of the coil (in which the switch would be kept to drive the lamp) and when examined the switch seems to be in good condition..

Erik said:

How is designing current limiters going to do that?


I just wished to ask few explanations on that current limiter circuit that Kai had posted. Having read the description i too believe it couldnt be used for my application.
but of course i could use that circuit when it happens for me to drive a lamp load in future.

As an alternative to resistor parallel to switch method,
any suggestions on a simpler method, with which, the inrush current flow through the reed switch could be controlled would be highly useful.


thanking you,
Suresh.






List of 57 messages in thread
TopicAuthorDate
inrush current + suitable voltage sour      Suresh R      03/04/06 10:14      
   Inrush current of lamp      Kai Klaas      03/04/06 20:47      
      Current inrush      Hal Albach      03/05/06 06:28      
         NTC?      Jan Waclawek      03/05/06 06:45      
            Soft-start      Kai Klaas      03/05/06 08:00      
               8 reed SW parallely + 21.12A / at 12VDC      Suresh R      03/06/06 05:29      
                  Car battery???      Anders Sandström      03/06/06 05:58      
                  inrush current      Terry Lingle      03/06/06 08:20      
                  totally irrelevant      Erik Malund      03/06/06 08:58      
                  No testing needed, standardly      Kai Klaas      03/06/06 19:46      
                     replies      Suresh R      03/07/06 02:05      
                        Reply to "replies"      Kai Klaas      03/07/06 07:29      
                           the difference between "cheap" and "inex      Erik Malund      03/07/06 07:44      
                           current limit resistor      Suresh R      03/07/06 09:17      
                              are you just grasping for straws?      Erik Malund      03/07/06 09:29      
            NTC, yes      Erik Malund      03/06/06 08:54      
               Filaments      Kai Klaas      03/06/06 18:38      
                  In the days of radios for AC and DC      Erik Malund      03/07/06 06:57      
                     Thanks      Kai Klaas      03/07/06 07:03      
            resistor parallel to Switch!      Suresh R      03/11/06 04:29      
               MOSFET, constant current source?      Kai Klaas      03/11/06 07:04      
                  not for my use      Suresh R      03/11/06 09:24      
                     Ok, but...      Kai Klaas      03/11/06 10:00      
                        but i think      Suresh R      03/11/06 10:25      
                           Relays      Kai Klaas      03/11/06 10:51      
                              yes ofcourse      Suresh R      03/11/06 11:46      
                                 here we go again        Erik Malund      03/13/06 06:57      
                                    Even more!!      Kai Klaas      03/13/06 07:14      
                                       werlcome to the club      Erik Malund      03/13/06 07:18      
                                       reply      Suresh R      03/13/06 10:49      
                                          why did you not say so?      Erik Malund      03/13/06 11:15      
                                          You made a fool of us!        Kai Klaas      03/13/06 18:24      
                                             reply      Suresh R      03/14/06 03:39      
                                                That's no fun!      Kai Klaas      03/14/06 07:06      
                                                   Suresh, I hope you had fun      Erik Malund      03/14/06 07:28      
                                                   reply      Suresh R      03/14/06 10:29      
                                                      yeah 6 days later.      Erik Malund      03/14/06 10:52      
                  Hello Kai,      Suresh R      03/16/06 22:03      
                     Look at here      Kai Klaas      03/17/06 10:56      
                        Thank you very much Kai.      Suresh R      03/18/06 07:40      
                           It just strikes me      Erik Malund      03/18/06 10:20      
                              yes you are right      Suresh R      03/18/06 12:32      
                                 Reed switch problems      Hal Albach      03/18/06 19:31      
                                    Current rating?      Kai Klaas      03/20/06 19:39      
                                       I recall long ago something about a "sti      Erik Malund      03/21/06 06:47      
                                       Reed problem      Hal Albach      03/21/06 07:11      
                                          Glueing together      Kai Klaas      03/21/06 07:35      
                                             Reed problems      Hal Albach      03/21/06 09:14      
                                                reed relayrs      Terry Lingle      03/21/06 14:01      
                           power dissipation calculations?      Suresh R      03/19/06 08:12      
                              bulb voltage drop      Terry Lingle      03/19/06 10:01      
                                 Thanks      Suresh R      03/20/06 02:12      
                                 (.2*bulb resistance      Suresh R      03/24/06 05:36      
                                    The bulb      Terry Lingle      03/24/06 07:06      
                              Constant current during inrush moment      Kai Klaas      03/24/06 07:22      
                                 Thanks a lot Kai      Suresh R      03/24/06 10:12      
         Choke would be huge      Kai Klaas      03/05/06 07:28      

Back to Subject List