Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Dejan Durdenic
03/05/12 14:13
Read: 443 times
Velika Gorica
Croatia


 
#186433 - Again...
Responding to: Per Westermark's previous message
how will you cure the glue? Remember, paste should already be there before you apply the glue.
Then, you have to cure the glue BEFORE reflow, otherwise why would you use it at all? And when
you cure the glue, what will happen to the paste - flux will evaporate and paste will dry too...
So, I still don't see how to use both glue and the paste. Glue is used when the board is designed
to be wave-soldered afterwards...

List of 21 messages in thread
TopicAuthorDate
Precision32 - SiLabs jumps on Cortex-M3 bandwagon      Andy Neil      03/03/12 05:54      
   QFN indicates PLCC, doesn't it?      Richard Erlacher      03/03/12 08:15      
      QFN is "lead-less"        Jan Waclawek      03/03/12 08:41      
         harder to mount      Andy Neil      03/03/12 08:49      
            Glue      Per Westermark      03/03/12 09:03      
               Glue and reflow?      Dejan Durdenic      03/03/12 09:10      
                  Cyanoacrylic type glue      Kalpak Dabir      03/03/12 20:26      
                     Is it used in mass production?      Dejan Durdenic      03/04/12 01:55      
                        I was wrong about the glue type for manufacture      Kalpak Dabir      03/04/12 02:38      
                           Nevertheless...      Dejan Durdenic      03/04/12 07:42      
                              Dispense      Per Westermark      03/04/12 07:58      
                                 Again...      Dejan Durdenic      03/05/12 14:13      
               re: Glue      Rob Klein      03/05/12 10:23      
         I hope this becomes standardized ...      Richard Erlacher      03/03/12 15:39      
            Eh??      Andy Neil      03/04/12 12:23      
               It seems that the industry's heading for a consensus      Richard Erlacher      03/05/12 07:39      
            PLCCs marked QFN      Oliver Sedlacek      03/05/12 02:56      
               Anyway,      Dejan Durdenic      03/05/12 14:18      
                  It doesn't have to be a PITA ...      Richard Erlacher      03/05/12 16:30      
                     That's the point!      Andy Neil      03/05/12 17:42      
                        Yes, and your starting point matters a great deal      Richard Erlacher      03/05/12 21:48      

Back to Subject List