| Mahmood Elnasser 04/14/12 10:43 Read: 1699 times Amman Jordan |
#187138 - CNC |
I purchased my own CNC machine and managed to make a PCB on it first time!
Life is good, now I opened unlimited possibilities for my work. My friend is coming Monday to teach me on the machine, but I couldn't wait and taught myself today. Broke 2 bits while learning. I used MACH3 to operate it, and CopperCAM for PCB gerber files to G-Code conversion. I managed to get 3 mil track width, which is very difficult to do with etching! Mahmood |
| Topic | Author | Date |
| CNC | Mahmood Elnasser | 04/14/12 10:43 |
| Enjoy :) | Oliver Sedlacek | 04/16/12 04:14 |
| Having fun | Mahmood Elnasser | 04/17/12 13:53 |
| Congratulations | Joseph Hebert | 04/16/12 09:42 |
| We looked at buying one of those | Jez Smith | 04/16/12 14:09 |
| Me Either! | Joseph Hebert | 04/16/12 14:17 |
| We use a variety | Jez Smith | 04/17/12 00:50 |
| do not be lazy,Mr.Smith | Stefan KAnev | 04/17/12 11:28 |
| prototype cost and turnaround | Joseph Hebert | 04/17/12 13:31 |
| I'll find the ads | Erik Malund | 04/17/12 14:14 |
| googled | Erik Malund | 04/17/12 14:22 |
| Ebay deal | Steve M. Taylor | 04/17/12 15:08 |
What about this one then...  | Robert Revens | 04/25/12 12:59 |
| Follow up on prototype board shops | Joseph Hebert | 06/22/12 08:41 |
| international pcb houses | Mahmood Elnasser | 06/22/12 14:13 |
| PCB Houses | Joseph Hebert | 06/22/12 16:55 |
| working out of town | Erik Malund | 04/17/12 07:20 |
| CNC bits | Mahmood Elnasser | 04/25/12 06:37 |
| answering | Joseph Hebert | 04/25/12 11:38 |
| it happens | Mahmood Elnasser | 04/25/12 14:51 |
| what other tools required? | Mahmood Elnasser | 04/25/12 15:00 |
| a new trick zeroing Z axis | Mahmood Elnasser | 04/26/12 12:26 |
| Z ref | Steve M. Taylor | 04/26/12 13:10 |
| Collet type | Mahmood Elnasser | 06/22/12 14:27 |
| Z axis reference | Mahmood Elnasser | 07/02/12 01:40 |
| Vacuum | Per Westermark | 07/02/12 02:35 |
| this sort of thing happens often, from my experience | Richard Erlacher | 05/01/12 07:38 |
| ctrl+A, crtl+C, submit | David Brown | 09/19/12 01:34 |
| tools | Joseph Hebert | 04/26/12 14:11 |
| holding the PCB | Mahmood Elnasser | 04/27/12 00:27 |
| Holding the PCB | Joseph Hebert | 04/27/12 14:06 |
| Carbon steel? | Per Westermark | 04/27/12 20:16 |
| Not tungsten carbide | Joseph Hebert | 04/28/12 16:37 |
| Just carbide is a bit lazy slang for tungsten carbide | Per Westermark | 04/28/12 21:41 |
| If you say so. | Joseph Hebert | 04/28/12 22:30 |
| Plate through holes | Mahmood Elnasser | 04/28/12 11:05 |
| plating holes | Joseph Hebert | 04/28/12 16:46 |
| plated through holes cont. | Joseph Hebert | 04/28/12 22:37 |
| 2 point registration system | Mahmood Elnasser | 04/30/12 14:27 |
| Need not be exactly in middle. | Per Westermark | 04/30/12 16:05 |
| is it that simple? | Mahmood Elnasser | 05/01/12 00:27 |
| 2-pin registration | Joseph Hebert | 04/30/12 23:40 |
| Fine pitch milling | Joseph Hebert | 05/01/12 23:54 |
| Solder Mask | Mahmood Elnasser | 05/02/12 10:28 |
| solder mask and legend | Joseph Hebert | 05/02/12 11:47 |
| too much work | Mahmood Elnasser | 05/02/12 15:54 |
| Much work | Joseph Hebert | 05/06/12 15:50 |
| My CNC | Steve M. Taylor | 05/07/12 06:57 |
| Is That... | Michael Karas | 05/07/12 10:30 |
| which cad did you use? | Mahmood Elnasser | 05/07/12 15:58 |
| Limit Switches | Michael Karas | 05/08/12 00:22 |
| Will do | Mahmood Elnasser | 05/08/12 10:55 |
| Little Plates | Michael Karas | 05/08/12 16:40 |
| MEchanical limit switches | Steve M. Taylor | 05/11/12 12:50 |
| Your project | Joseph Hebert | 05/10/12 06:18 |
| This: | Steve M. Taylor | 05/11/12 12:38 |
| very cool! | Joseph Hebert | 05/11/12 13:29 |
| Funnel | Michael Karas | 05/12/12 12:37 |
| Funnel ! | Steve M. Taylor | 05/13/12 13:04 |
| Lawyer or Solicitor - Not ! ! | Michael Karas | 05/13/12 15:43 |
| RIght | Steve M. Taylor | 05/14/12 12:16 |
| vacuum pick and place tool | David Brown | 09/19/12 01:29 |
| 90 degrees bits | Mahmood Elnasser | 09/14/12 04:22 |
| Z-axis depth control | Joseph Hebert | 09/15/12 22:53 |
| stepper | Mahmood Elnasser | 09/16/12 06:34 |
| z-axis control | Joseph Hebert | 09/16/12 15:37 |
| oiling | Mahmood Elnasser | 09/29/12 14:49 |
| lubrication | Joseph Hebert | 10/01/12 10:41 |
| Lube | Steve M. Taylor | 10/05/12 14:47 |
| ballscrews | Mahmood Elnasser | 10/06/12 00:21 |
| Ballscrews | Steve M. Taylor | 10/06/12 14:00 |
| Sometimes it's useful for controlling dynamics | Richard Erlacher | 10/06/12 14:08 |
| ballscrews & table slides | Joseph Hebert | 10/06/12 15:15 |
LINUXCNC | Mahmood Elnasser | 10/19/12 02:08 |