Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Ap Charles
05/17/12 09:42
Read: 449 times

#187401 - Epoxy resins
Responding to: Oliver Sedlacek's previous message
Oliver Sedlacek said:
Epoxy resins typically have a maximum service temperature of around 130C, so many go soft or oxidise if heated to 150C. They are however much stronger, with a tensile strength of up to 80 MPa. Some like ResinTek E130-HT are also rated to 180C. In my experience, a big problem is that they are so strong that they can rip small components off their solder pads during the curing process as the epoxy moves.

Polyurethane compounds are the easiest to use, so I would suggest something like ResinTek U900 to start with as it wont damage delicate components.

Hello Oliver, But Epoxy resins are very prone to dissolving....


List of 11 messages in thread
circuit potting compound      AP Charles      05/17/12 06:20      
   Secure from what?      Kai Klaas      05/17/12 06:35      
      product piracy      AP Charles      05/17/12 06:46      
         Choices      Oliver Sedlacek      05/17/12 08:59      
            Epoxy resins      AP Charles      05/17/12 09:42      
               ?      Steve M. Taylor      05/17/12 12:58      
                  Epoxys      AP Charles      05/17/12 23:23      
               Really?      Oliver Sedlacek      05/18/12 03:27      
                  Stable      AP Charles      05/18/12 07:05      
                     Solvent tested      Oliver Sedlacek      05/21/12 12:14      
   just curious      Erik Malund      05/18/12 07:06      

Back to Subject List