Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Jim Granville
09/13/12 15:06
Read: 640 times


 
#188319 - Interesting problem
Responding to: Richard Erlacher's previous message
Richard Erlacher said:
What I'm envisioning, as stated, in part before, is a wand, perhaps 20-25 cm long with probes spaced at perhaps 50 mm spacing along its length, and rotating full-circle about the amputated extremity, with a computer controlling the penetration, possibly open-loop, and monitoring the corresponding pressure.


50mm sounds coarse, and monitoring pressure for penetration sounds backwards.
I would use a moving/scanning pivot-arm approach, to get a continual surface record, and set a nominally fixed pressure, and measure the deflection as the pressure point and axis is moved.

Something like a nylon wheel on the probe end, would help avoid side-ways sticking effects, and simplify operator control to the level of orbit position.
Orbit position could be set with a spin-handle on a gear+track, like
http://www.sdp-si.com/web/html/newprdgears3.htm
and/or a stepper motor.

With an arm design, a rotary encoder+maths can give end-point location, but it is quite distance compliant, and safe.

Another track-following quadrature encoder would record where on the orbit-circle the axle was, and a third one could check the spring deflection (or the operator could just manually keep a fixed pressure setting )

So the problem has morphed into 2 or 3 encoders, which are easy to scale and choose, and pressure is nominally fixed per scan.
Multiple scans would build up a contour style plot.

You can get very fine scan resolution, sub-mm.

-jg

List of 49 messages in thread
TopicAuthorDate
How would you do this?      Richard Erlacher      09/10/12 10:30      
   I have no idea if this would work, but ....      Erik Malund      09/10/12 10:32      
      How would one actuate them?      Richard Erlacher      09/10/12 12:29      
   strain guage      Mahmood Elnasser      09/10/12 11:03      
      Yes, you might be onto something.      Richard Erlacher      09/10/12 12:49      
         Computer-controlled?      Per Westermark      09/10/12 16:37      
            computer controlled      Richard Erlacher      09/10/12 19:52      
               Calibration + redundant force-limitation      Per Westermark      09/11/12 00:03      
               Interesting problem      Jim Granville      09/13/12 15:06      
                  Yes, it seemed coarse, at first.      Richard Erlacher      09/13/12 17:08      
                     Precision is cheap ?      Jim Granville      09/14/12 15:15      
                        I don't follow ...       Richard Erlacher      09/15/12 09:59      
                           Precision      Jim Granville      09/15/12 19:09      
                              other considerations      Richard Erlacher      09/15/12 20:15      
         Tomographic imaging?      Christoph Franck      09/11/12 04:47      
            There's one major problem ... maybe two ...      Richard Erlacher      09/11/12 09:20      
               $100 MRI unit      Erik Malund      09/11/12 09:31      
                  I'm not sure ...       Richard Erlacher      09/12/12 09:57      
         Voice coil and LVDT?      Oliver Sedlacek      09/12/12 02:37      
            Not having a lot of experience with this sort of stuff ...      Richard Erlacher      09/12/12 10:07      
               Danger/problems with hydraulic since no spring effect      Per Westermark      09/12/12 13:55      
                  A few things puzzle me with this approach      Richard Erlacher      09/13/12 02:07      
   Ultra Sound Probing      Michael Karas      09/10/12 16:36      
      Ultra-sound is better for measuring surface or sub-surface      Per Westermark      09/10/12 16:39      
   I would not use volumetric imaging      Justin Fontes      09/13/12 11:05      
      I'm not sure what you mean      Richard Erlacher      09/13/12 16:59      
         another thought      Rick Gebhardt      09/17/12 13:43      
            I consider that one of the more "pregnant" approaches      Richard Erlacher      09/17/12 15:25      
               Lots of options available      Per Westermark      09/17/12 16:14      
                  You've got to consider cost      Richard Erlacher      09/18/12 16:50      
                     Cost/safety      Per Westermark      09/18/12 18:29      
                     Cost target?      Oliver Sedlacek      09/21/12 08:37      
                        The price target comes from a few prosthetists      Richard Erlacher      09/21/12 21:46      
   comercial CMM      Mahmood Elnasser      09/17/12 13:58      
      This only received cursory examination       Richard Erlacher      09/17/12 15:28      
         pneumatic actuator      Rick Gebhardt      09/17/12 20:14      
            Yes ... but what would this cost?      Richard Erlacher      09/17/12 23:30      
               100 rods?      Per Westermark      09/18/12 02:04      
                  Patient size ...      Christoph Franck      09/18/12 06:12      
                     That's what I'm considering      Richard Erlacher      09/18/12 07:50      
                     AAACK! ... another double post ...       Richard Erlacher      09/18/12 07:50      
                  it's not as big as you think!      Richard Erlacher      09/18/12 07:40      
                     90% coverage      Maarten Brock      09/19/12 03:47      
                        So maybe vacuum pump for the too fat people      Per Westermark      09/19/12 06:38      
   I do not know if this is relevant, but      Erik Malund      09/19/12 07:52      
      I'll have to look into this.      Richard Erlacher      09/19/12 09:13      
         Single air pressure sensor sensor for tip force guestimate      Per Westermark      09/19/12 11:27      
   What about infrared?      Marshall Brown      09/21/12 03:03      
      How would you do this so it would retail for under $5k      Richard Erlacher      09/21/12 08:21      

Back to Subject List