Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
09/17/12 13:43
Read: 581 times


 
#188377 - another thought
Responding to: Richard Erlacher's previous message
I like the pneumatic piston idea. I was thinking of a frame with multiple pneumatic controlled rods. The frame would travel in steps and be mounted on a larger frame that connects to the limb. The smaller frame assembly would hold the pneumatic detector rods. It would scan one horizontal.. line on each pass. Total lines needed would be determined by travel distance and step increment.
The pneumatic detectors would find the zero position of the rods with a small amount of air pressure. A computer would read each rods zero position. The 'read' pressure would then be applied and travel distance noted.
The system could easily display the 3d surface of the limb for zero and read pressures. I would also suggest rotating the whole system and doing multiple passes.
The position detectors would be very simple and accurately detect any position of the rods. Imagine inserting a long steel core being inserted into a long electromagnet. This could change either impedence or frequency of an oscillator. Positions could easily be logged and linearized.
Rick

List of 49 messages in thread
TopicAuthorDate
How would you do this?      Richard Erlacher      09/10/12 10:30      
   I have no idea if this would work, but ....      Erik Malund      09/10/12 10:32      
      How would one actuate them?      Richard Erlacher      09/10/12 12:29      
   strain guage      Mahmood Elnasser      09/10/12 11:03      
      Yes, you might be onto something.      Richard Erlacher      09/10/12 12:49      
         Computer-controlled?      Per Westermark      09/10/12 16:37      
            computer controlled      Richard Erlacher      09/10/12 19:52      
               Calibration + redundant force-limitation      Per Westermark      09/11/12 00:03      
               Interesting problem      Jim Granville      09/13/12 15:06      
                  Yes, it seemed coarse, at first.      Richard Erlacher      09/13/12 17:08      
                     Precision is cheap ?      Jim Granville      09/14/12 15:15      
                        I don't follow ...       Richard Erlacher      09/15/12 09:59      
                           Precision      Jim Granville      09/15/12 19:09      
                              other considerations      Richard Erlacher      09/15/12 20:15      
         Tomographic imaging?      Christoph Franck      09/11/12 04:47      
            There's one major problem ... maybe two ...      Richard Erlacher      09/11/12 09:20      
               $100 MRI unit      Erik Malund      09/11/12 09:31      
                  I'm not sure ...       Richard Erlacher      09/12/12 09:57      
         Voice coil and LVDT?      Oliver Sedlacek      09/12/12 02:37      
            Not having a lot of experience with this sort of stuff ...      Richard Erlacher      09/12/12 10:07      
               Danger/problems with hydraulic since no spring effect      Per Westermark      09/12/12 13:55      
                  A few things puzzle me with this approach      Richard Erlacher      09/13/12 02:07      
   Ultra Sound Probing      Michael Karas      09/10/12 16:36      
      Ultra-sound is better for measuring surface or sub-surface      Per Westermark      09/10/12 16:39      
   I would not use volumetric imaging      Justin Fontes      09/13/12 11:05      
      I'm not sure what you mean      Richard Erlacher      09/13/12 16:59      
         another thought      Rick Gebhardt      09/17/12 13:43      
            I consider that one of the more "pregnant" approaches      Richard Erlacher      09/17/12 15:25      
               Lots of options available      Per Westermark      09/17/12 16:14      
                  You've got to consider cost      Richard Erlacher      09/18/12 16:50      
                     Cost/safety      Per Westermark      09/18/12 18:29      
                     Cost target?      Oliver Sedlacek      09/21/12 08:37      
                        The price target comes from a few prosthetists      Richard Erlacher      09/21/12 21:46      
   comercial CMM      Mahmood Elnasser      09/17/12 13:58      
      This only received cursory examination       Richard Erlacher      09/17/12 15:28      
         pneumatic actuator      Rick Gebhardt      09/17/12 20:14      
            Yes ... but what would this cost?      Richard Erlacher      09/17/12 23:30      
               100 rods?      Per Westermark      09/18/12 02:04      
                  Patient size ...      Christoph Franck      09/18/12 06:12      
                     That's what I'm considering      Richard Erlacher      09/18/12 07:50      
                     AAACK! ... another double post ...       Richard Erlacher      09/18/12 07:50      
                  it's not as big as you think!      Richard Erlacher      09/18/12 07:40      
                     90% coverage      Maarten Brock      09/19/12 03:47      
                        So maybe vacuum pump for the too fat people      Per Westermark      09/19/12 06:38      
   I do not know if this is relevant, but      Erik Malund      09/19/12 07:52      
      I'll have to look into this.      Richard Erlacher      09/19/12 09:13      
         Single air pressure sensor sensor for tip force guestimate      Per Westermark      09/19/12 11:27      
   What about infrared?      Marshall Brown      09/21/12 03:03      
      How would you do this so it would retail for under $5k      Richard Erlacher      09/21/12 08:21      

Back to Subject List