Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
Joseph Hebert
10/08/13 17:57
Read: 1009 times
Okemah, Ok
United States

#190040 - headers and plugs
Responding to: Michael Karas's previous message
Can you not find a 1x16 header to solder onto the LCD board? You should be able to get ribbon cable crimp-on plugs mated to whatever headers you're using. I know you've seen the crimp-on plugs I'm talking about. They have the self-piercing contacts (a sort of miniature version of the telco punch block contacts) that allow you to lay the ribbon cable in situ and make all the connections at once by clamping the plug closed.


List of 13 messages in thread
LCD Adapter Assembly / Cable      Michael Karas      10/08/13 15:03      
   headers and plugs      Joseph Hebert      10/08/13 17:57      
      Grunch On Ribbon Connectors      Michael Karas      10/08/13 22:26      
         Solution      Joseph Hebert      10/09/13 10:01      
            Point Taken      Michael Karas      10/09/13 11:18      
   two solutions      Mahmood Elnasser      10/09/13 03:09      
      Almost      Michael Karas      10/09/13 05:37      
         pin layout      Mahmood Elnasser      10/09/13 05:52      
            Re-Poking Pins      Michael Karas      10/09/13 08:17      
   I've seen this, but is it "standard"?      Richard Erlacher      10/14/13 09:21      
      Standard???      Michael Karas      10/15/13 06:33      
         Doubtful if there is any standard what so ever.       Andy Neil      10/18/13 11:35      
         Standard is probably a poor choice of terms ...       Richard Erlacher      10/21/13 12:58      

Back to Subject List