Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Thread Closed: Issue successfully resolved

Terry Lingle
07/27/05 12:08
Read: 1160 times
Clearwater
Canada


 
#98295 - AFIK de watering fluids
Responding to: Steve M. Taylor's previous message
such as methyl hydrate Absorb the water then they must be removed by other means. They also may adversely affect the varnish and insulation in the transformer. I generally shy away from adding chemicals if there is a less invasive way. Heat was used in the manufacture of the transformer so all I would do is insure that the heat levels used were under those applied when the hot dip varnish was applied. Before I started to dry out the parts I would wash them off with clean water to remove mud etcetera. that got into the machines.
The pneumatics will have input ports and exhausts that were probably not sealed against immersion. Again I would use the same conditions that the pneumatics are expected to live with to drive the water out. Because there will be lubricant in the air passages you have a little longer to dry them out than you would have with exposed unfinished steel before rusting starts.
Terry


List of 26 messages in thread
TopicAuthorDate
TOT : Bombay is flooded      Jerson Fernandes      07/27/05 00:27      
   My machines are swiming.      Prahlad J. Purohit      07/27/05 00:42      
      Very sorry state of affairs      Jerson Fernandes      07/27/05 00:44      
         Safe ?      Steve M. Taylor      07/27/05 02:25      
            All is well now and improving      Jerson Fernandes      07/27/05 04:27      
               Good news      Steve M. Taylor      07/27/05 04:45      
                  Re: Good News.      Prahlad J. Purohit      07/27/05 05:54      
                     Wet ...      Rob Klein      07/27/05 06:26      
                        Yes,      Steve M. Taylor      07/27/05 07:13      
                           IPA?      Rob Klein      07/27/05 07:20      
                              Re: Machines Damaged.      Prahlad J. Purohit      07/27/05 07:58      
                                 wet machines      Terry Lingle      07/27/05 09:39      
                                    de-watering fluid      Steve M. Taylor      07/27/05 09:45      
                                       AFIK de watering fluids      Terry Lingle      07/27/05 12:08      
                                 Ingress ?      Steve M. Taylor      07/27/05 09:42      
                              Hot Air Gun and Sillica Gel      Abhishek Singh      07/27/05 10:06      
                  In 31 years      Jerson Fernandes      07/27/05 07:15      
   How is it now ?      Steve M. Taylor      07/29/05 01:46      
      Salaam Bombay      Vignesh Prasad      07/29/05 11:53      
      Were doing well Steve      Jerson Fernandes      07/30/05 19:53      
         MORE rain ?      Steve M. Taylor      07/31/05 05:32      
            Yes MORE rain      Prahlad J. Purohit      07/31/05 06:46      
               I wish I could      Jerson Fernandes      07/31/05 10:35      
                  condolences to all affected people      Terry Lingle      07/31/05 11:54      
               OK ?      Steve M. Taylor      08/02/05 15:33      
                  All is well now - Thank you      Jerson Fernandes      08/06/05 07:37      

Back to Subject List